Allow the test, urine specimen, and/or controls to reach room
temperature (15-30ºC) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove
the cup from the sealed pouch and use it within one hour.
2. Pull tab to remove cap, collect specimen in the cup and secure
cap by pressing down on all three corners.
3. Check the temperature label (Temp Label) up to 4 minutes after
specimen collection. A green color will appear to indicate the
temperature of the urine specimen. The proper range for an
unadulterated specimen is 32-38°C (90-100°F).
4. Check the cap for a tight seal, date and initial the security
seal label, then place it over the cap.
5. Remove one key from the kit, place the cup on a flat surface,
and push the key into the socket of the cup to begin the test.
Start timer.
6. Remove the peel off label covering the test results and wait for
the colored line(s) to appear. Read results at 5 minutes. Do not
interpret results after 10 minutes.
The Multi-Drug Rapid Test is a rapid screening test that can be
performed without the use of an instrument. The test utilizes
monoclonal antibodies to selectively detect elevated levels of
specific drugs in specimen. It is rapid test for the simultaneous,
qualitative detection of multiple drugs and drug metabolites in
human specimen. For healthcare professionals including
professionals at point of care sites.
PRODUCT FEATURES
Multiple Drug Tests in One Go
Fast results
Easy visually interpretation
Simple operation, no equipment required
High accuracy
