DIRECTIONS FOR DIPSTICK USE
Allow the test, urine specimen, and/or controls to reach room
temperature (15-30ºC) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove
the test dipstick from the sealed pouch and use it within one hour.
2. With arrows pointing toward the urine specimen, immerse the test
dipstick vertically in the urine specimen for at least 10-15
seconds. Do not pass the maximum line (MAX) on the Test Dipstick
when immersing the strip. See the illustration below.
3. Place the test dipstick on a non-absorbent flat surface, start
the timer and wait for the colored line(s) to appear. Read results
at 5 minutes. Do not interpret the result after 10 minutes.
INTERPRETATION OF RESULTS
(Please refer to the illustration above)
NEGATIVE:* Two lines appear. One color line should be in the
control region (C), and another apparent color line should be in
the test region (T). This negative result indicates that the
AB-PINACA (ABP) concentration is below the detectable level.
*NOTE: The shade of color in the test region (T) may vary, but it
should be considered negative whenever there is even a faint color
line.
POSITIVE: One color line appears in the control region (C). No line
appears in the test region (T). This positive result indicates that
the AB-PINACA (ABP) concentration is above the detectable level .
INVALID: Control line fails to appear. Insufficient specimen volume
or incorrect procedural techniques are the most likely reasons for
control line failure. Review the procedure and repeat the test with
a new Test Cassette. If the problem persists, discontinue using the
Test Cassette immediately and contact your local distributor.
| Cat. No. | Product Description | Specimen | Format | Kit Size | Cut-Off | Status |
|
| DABP-102 | AB-PINACA (ABP) Rapid Test Cassette | Urine | Cassette | 40 T | 10 ng/mL* | CE |
| DABP-114 | AB-PINACA (ABP) Rapid Test Panel | Urine | Panel | 40 T | CE |
| DABP-101 | AB-PINACA (ABP) Rapid Test Dipstick | Urine | Dipstick | 50 T | CE |
