| Product features | Parameters |
| Principle | Chromatographic Immunoassay |
| Format | Device |
| Specimen | Oral Fluid |
| Certificate | CE |
| Reading Time | 5 minutes |
| Pack | 25 T |
| Storage Temperature | 2-30°C |
| Shelf Life | 2 Years |
| Cut-Off | Ref. Analytes |
Multi-Drug 2~7/9/12 Drugs Rapid Test Device, Detection of multiple
drugs and drug metabolites
Convenient Multi-Drug Rapid Test Device A - Oral Fluid High Quality
Fast Reading Drug Abuse Test Kits Diagnosis With CE
Application And Description:
The Multi-Drug Rapid Test Midstream for AMP/ MET/ COC/ OPI/ THC/
PCP/ MTD/MD/MA/ BZO/ OXY/ COT/ K2/ KET/ BAR/ BUP/ 6-MAM/ TML/
FYL/CFYL/ MD/PV/ α-PVP/ ALC and their metabolites is a rapid, oral
fluid screening test that can be performed without the use of an
instrument. The test utilizes monoclonal antibodies to selectively
detect elevated levels of specific drugs in human oral fluid.
How to use?
Allow the test device, specimen, and/or controls to reach room
temperature (15-30°C) prior to testing. Instruct the donor to not
place anything in the mouth including food, drink, gum or tobacco
products for at least 10 minutes prior to collection.
1. Bring the pouch to room temperature before opening it. Remove
the test from the sealed pouch and use it within one hour.
2. Take off the device cap and insert the absorbent wick to the
mouth .put it under the tongue to collect oral fluid until the
colored lines appear and then take out the midstream.
3. Place the test device on a clean and level surface. See
illustration below.
4. Read drug strip results at 10 minutes. Do not read results after
1 hour
5. Read Alcohol indicator result (when ALC indicator is included in
the test) at three to Five (3-5) minutes. Compare the color of the
reaction pad with the color chart provided separately/on foil pouch
to determine the relative oral fluid alcohol level.
Multi-Drug Rapid Test Device B - Oral Fluid High Quality Fast
Reading Drug Abuse Diagnosis With CE
Application And Description:
The Multi-Drug Rapid Test Midstream for AMP/ MET/ COC/ OPI/ THC/
PCP/ MTD/ MD/MA/ BZO/ OXY/ COT/ K2/ KET/ BAR/ BUP/ 6-MAM/ TML/
FYL/CFYL/ MD/PV/ α-PVP and their metabolites is a rapid, oral fluid
screening test that can be performed without the use of an
instrument. The test utilizes monoclonal antibodies to selectively
detect elevated levels of specific drugs in human oral fluid.
How to use?
Allow the test device, specimen, and/or controls to reach room
temperature (15-30°C) prior to testing. Instruct the donor to not
place anything in the mouth including food, drink, gum or tobacco
products for at least 10minutes prior to collection.
1. Remove the test device from the sealed pouch and use it within
one hour.
2. Insert the absorbent wick to the mouth and put it under the
tongue to collect oral fluid until the control line appears.
3. Place the test device on a clean and level surface. See
illustration below.
4. Read results at 10 minutes. Do not read results after 15
minutes.
Multi-Drug Rapid Test Device D - Oral Fluid Drug Abuse Diagnosis
Convenient Reading With CE And High Sensitivity
Application And Description:
The Multi-Drug Rapid Test for AMP/ MET/ COC/ OPI/ MOP/THC/ PCP/
MTD/ MD/MA/ BZO/ OXY/
COT/ K2/ KET/ BAR/ BUP/ 6-MAM/ TML/ FYL/CFYL/ MD/PV/ α-PVP/LS/D/
ALC and their metabolites is a rapid, oral fluid screening test
that can be performed without the use of an instrument. The test
utilizes monoclonal antibodies to selectively detect elevated
levels of specific drugs in human oral fluid.
How to use?
Allow the test Device, specimen, and/or controls to reach room
temperature (15-30°C) prior to testing. Instruct the donor to not
place anything in the mouth including food, drink, gum or tobacco
products for at least 10 minutes prior to collection.
1. Bring the pouch to room temperature before opening it. Remove
the test from the sealed pouch and use it within one hour.
2. Take off the device cap and collect oral fluid specimen as
follows.
Important: Place the tongue against the upper and lower jaws and
roots to enrich the oral fluid.
Insert the sponge end into the mouth, actively swab around the gums
on both sides of the mouth (10-15 times) to assist saturation.
Put the absorbent wick under the tongue to collect oral fluid until
the flow appear in the test windows (approximately 60 seconds) and
then take out the device and start a timer.
If no flow appeared repeat the procedure in steps above until the
flow appear. If no flow appeared after triplicate of steps above,
discard the device, review procedures with the donor and repeat the
test using a new device.
3. Place the test device on a clean and level surface.
4. Read the test result at 3-10 minutes. If all lines are clearly
visible at 3 minutes or sooner, then the test can be interpreted as
negative and discarded. If any lines are not visible at 3 minutes,
then the test should be re-read at 10 minutes.
5. Alcohol indicator, when applicable, the result should be read at
3-5 minutes. Compare the color of the reaction pad with the color
chart provided separately/on foil pouch to determine the relative
oral fluid alcohol level.
Order Information
| Cat. No. | Product | Specimen | Pack |
| DSD-823~873-A | Multi-Drug 2~7 Drugs Rapid Test Device | Oral Fluid | 25 T |
| DSD-823~893-B | Multi-Drug 2~9 Drugs Rapid Test Device | Oral Fluid | 25 T |
| DSD-823~8123-D | Multi-Drug 2~12 Drugs Rapid Test Device | Oral Fluid | 25 T |
