A rapid test for the qualitative detection of follicle stimulating
hormone (FSH) in urine CE certified
| Product features | Parameters |
| Principle | Chromatographic Immunoassay |
| Format | Cassette |
| Specimen | Urine |
| Certificate | CE |
| Reading Time | 3 minutes |
| Pack | 40T |
| Storage Temperature | 2-30°C |
| Shelf Life | 2 Years |
| Sensitivity | ＞99.9% |
| Specificity | ＞99.9% |
| Accuracy | ＞99.9% |
| Cut-Off | 25-100 mlU/mL |
Applications:
The FSH Rapid Test Midstream (Urine) is a rapid chromatographic
immunoassay for the qualitative detection of follicle stimulating
hormone (FSH) in urine to aid in the detection of menopause.
Description:
Menopause is the permanent cessation of menstruation but is usually
not scientifically diagnosed until one full year after a woman’s
menstrual periods have stopped. The period leading up to menopause,
and the 12 months following, is known as perimenopause..
Many women experience symptoms during this time including hot
flashes, irregular menstrual cycles, sleep disorders, vaginal
dryness, hair loss, anxiety and mood swings, short-term memory loss
and fatigue. The onset of perimenopause is caused by changes in the
levels of hormones in the female body that regulate the menstrual
cycle.
As the body produces less and less estro/gen, it increases its
production of Follicle-Stimulating Hormone (FSH), which normally
regulates the development of a female’s eggs. Therefore, testing
for FSH can help determine whether a woman is in the perimenopause
stage. If a woman knows she is perimenopausal, she can take the
appropriate steps to keep her body healthy and avoid the health
risks associated with menopause, which include osteoporosis,
increased blood pressure and cholesterol, and increased risk of
heart disease.
FSH Rapid Test Midstream is a rapid, one-step lateral flow
immunoassay for the qualitative detection of FSH in urine to aid in
the detection of menopause. The test utilizes a combination of
antibodies including a monoclonal anti-FSH antibodies to
selectively detect elevated levels of FSH. The assay is conducted
by urinating on the Absorbent Tip or immersing the Absorbent Tip in
urine, and obtaining the result from the colored lines.
How to use?
Allow the test, urine specimen and/or controls to reach room
temperature (15-30°C) prior to testing.
- Determine the day to begin testing. (See the above section: “WHEN
TO START TESTING”).
- Bring the pouch to room temperature before opening it. Remove the
test midstream from the sealed pouch and use it as soon as
possible.
- Take down the cap of the midstream, then urinate on it or place the
head of sponge(≥2/3) into urine sample in a clean cup at least 15
seconds(see illustration below).
- Cover the cap on the testing midstream, then lay down the products
on a clean and stable desk with the test and control window face
upwards, and then start the timer immediately.
- As the test begins to work, you may notice a light colored flow
moving across the test and control window. Read the result at 3
minutes. Do not interpret the result after 10 minutes.
INTERPRETATION OF RESULTS
(Please refer to the illustration)
POSITIVE:
Two lines are visible and the line in test line region (T) is the
same as or darker than the line in the control line region (C). A
positive result means that the FSH level is higher than normal.
Record the results and see the chart below to interpret results.
NEGATIVE:
Two lines are visible, but the line in the test line region (T) is
lighter than the line in the control line region (C), or there is
no line in the test line region (T). A negative result means that
the FSH level is not elevated at this time. Record the results and
see the chart below to interpret results.
INVALID:
Control line fails to appear. Insufficient specimen volume or
incorrect procedural techniques are the most likely reasons for
control line failure. Review the procedure and repeat the test with
a new test. If the problem persists, discontinue using the test kit
immediately and contact your local distributor.
QUALITY CONTROL
A procedural control is included in the test. A colored line
appearing in the Reference Line region (C) is an internal
procedural control. It confirms sufficient specimen volume,
adequate membrane wicking and correct procedural technique.
It is recommended that external positive and negative controls be
tested with each new kit, lot or shipment of product, with each
change in operator within the test kit, weekly as a check on
continued storage conditions, and as otherwise required by your
laboratory's internal quality system procedures.
Order Information
| Cat. No. | Product | Specimen | Pack |
| FFS-R102 | Follicle Stimulating Hormone (FSH) Rapid Test Cassette | Urine | 40T |
