Urinalysis Reagent Dipsticks - 1~14 parameter
| Product: | Urinalysis Reagent Dipsticks - 1~14 Parameter |
| Format: | Dipstick |
| Certificate: | CE |
| Pack: | 100 T |
| Shelf Life: | 2 Years |
| Principle: | Biochemical Assay |
| Specimen: | Urine |
| Reading Time: | 1-2 Minutes |
| Storage Temperature: | 2-30°C |
| Cut-Off: | Analytes: (ASC, BLO, BIL, URO,KET,GLU, PRO, NIT, LEU, PH,
SG,ALB,CRE,CA) |
Description:
Urine undergoes many changes during states of disease or body
dysfunction before blood composition is altered to a significant
extent. Urinalysis is a useful procedure as an indicator of health
or disease, and as such, is a part of routine health screening. The
Urinalysis Reagent Strips (Urine) can be used in general evaluation
of health, and aids in the diagnosis and monitoring of metabolic or
systemic diseases that affect kidney function, endocrine disorders
and diseases or disorders of the urinary tract.
How to use?
Allow the strip, urine specimen, and/or controls to reach room
temperature (15-30ºC) prior to testing.
1. Remove the strip from the closed canister and use it as soon as
possible. Immediately close the canister tightly after removing the
required number of strip(s). Completely immerse the reagent areas
of the strip in fresh, well-mixed urine and immediately remove the
strip to avoid dissolving the reagents. See illustration 1 below.
2. While removing the strip from the urine, run the edge of the
strip against the rim of the urine container to remove excess
urine. Hold the strip in a horizontal position and bring the edge
of the strip into contact with an absorbent material (e.g. a paper
towel) to avoid mixing chemicals from adjacent reagent areas and/or
soiling hands with urine. See illustration 2 below.
3. Compare the reagent areas to the corresponding color blocks on
the canister label at the specified times. Hold the strip close to
the color blocks and match carefully. See illustration 3 below.
Note: Results may be read up to 2 minutes after the specified
times. Results may also be read using the Mission® Urine Analyzers.
Refer to the Instruction Manual for details.
The Urinalysis Reagent Strips (Urine) are firm plastic strips onto
which several separate reagent areas are affixed. The test is for
the qualitative and semi-quantitative detection of one or more of
the following analytes in urine: Ascorbic acid, Glucose, Bilirubin,
Ketone (Acetoacetic acid), Specific Gravity, Blood, pH, Protein,
Urobilinogen, Nitrite and Leukocytes.
Features
Fast results
Easy visually interpretation
Simple operation, no equipment required
High accuracy
| Cat. No. | Product Description | Specimen | Format | Kit Size | Cut-Off | Status |
|
| U031-01 | Urinalysis Reagent Dipsticks - 1 parameter | Urine | Dipstick | 100 T | Analytes: (ASC, BLO, BIL, URO,KET,GLU, PRO, NIT, LEU, pH,
SG,ALB,CRE,CA) | CE |
| U031-02 | Urinalysis Reagent Dipsticks - 2 parameters | Urine | Dipstick | 100 T | CE |
| U031-03 | Urinalysis Reagent Dipsticks - 3 parameters | Urine | Dipstick | 100 T | CE |
| U031-04 | Urinalysis Reagent Dipsticks - 4 parameters | Urine | Dipstick | 100 T | CE |
| U031-05 | Urinalysis Reagent Dipsticks - 5 parameters | Urine | Dipstick | 100 T | CE |
| U031-06 | Urinalysis Reagent Dipsticks - 6 parameters | Urine | Dipstick | 100 T | CE |
| U031-07 | Urinalysis Reagent Dipsticks - 7 parameters | Urine | Dipstick | 100 T | CE |
| U031-08 | Urinalysis Reagent Dipsticks - 8 parameters | Urine | Dipstick | 100 T | CE |
| U031-09 | Urinalysis Reagent Dipsticks - 9 parameters | Urine | Dipstick | 100 T | CE |
| U031-10 | Urinalysis Reagent Dipsticks - 10 parameters | Urine | Dipstick | 100 T | CE |
| U031-11 | Urinalysis Reagent Dipsticks - 11 parameters | Urine | Dipstick | 100 T | CE |
| U031-12 | Urinalysis Reagent Dipsticks - 12 parameters | Urine | Dipstick | 100 T | CE |
| U031-13 | Urinalysis Reagent Dipsticks - 13 parameters | Urine | Dipstick | 100 T | CE |
| U031-14 | Urinalysis Reagent Dipsticks - 14 parameters | Urine | Dipstick | 100 T | CE
|
